ope体育

Speed dynamics

contact us

Telephone: 0755-85242903
mobile phone: thirteen billion nine hundred and two million nine hundred and thirty-three thousand eight hundred and ninety-six
Fax: 0755-88218871
E-mail: szchisu@163.com
contacts: Mr. Liu
Address: 3 / F, building 8, 2 / F, building 9, xinxintian Industrial Park, Xinsha Road, Shajing street, Bao'an District, Shenzhen
Postcode: five hundred and eighteen thousand one hundred and four

Current position: Automatic screw locking machine > Speed dynamics > common problem

common problem

What should be paid attention to in operation of XZ-1 automatic screw machine?

Date: July 30, 2018 11:04:10 reading: 197

XZ-1 locking screw machine Hand held automatic screw machine The operation of the equipment requires air source and power supply, and the operation and routine maintenance must be guided according to the manual of hand-held screw machine supplied by our company.

1. Power supply voltage: 220 V / 50 Hz;

2. Compressed air pressure: the correct compressed air pressure of XZ-1 screw machine is in the range of 0.4-0.6mpa. When the air pressure is lower than 0.5MPa, the speed and strength of screw feeding will be affected, and even the screw can not be delivered on time. Try not to use too long compressed air pipeline, which will cause great pressure drop in the compressed air. If you have to, choose a larger diameter screw feeder Tube;

Compressed air and compressed air must be treated by pressure resistant pipeline and pressure resistant.

 Air pressure requirements for hand held screw machines

4. Lubrication: the feeding mechanism shall use compressed air not mixed with lubricating oil; other parts shall use compressed air mixed with lubricating oil.

5. Demagnetization: during the operation of the automatic nail feeder, the magnetization of relevant parts will occur, which will affect the delivery of small screws. Demagnetization should be performed once a month or as the case may be.

 Maintenance of clamp nozzle of automatic screw machine

6. Cleaning: the screw lifting part may cause dust due to the uncleanness of the screw and the friction between the screw and the screw. The dust will have a negative impact on the feeding part of the screw. It is recommended to clean the screw once every shift or arrange the cleaning work of the feeder regularly according to the situation, so as to ensure the normal operation of the equipment;

 Automatic feeder cleaning

Automatic nail feeder cleaning

 Maintenance of automatic nail feeder

It is recommended to clean the feeding part once a month and the chuck part every two weeks.

The above screw machine is suitable for automatic maintenance.
Copyright notice:
The content and copyright of this website are all owned by Chi speed automation. Please do not reprint it in any form.
The pictures of our company are all real pictures of our production workshop. If you need to call them, you must keep our logo watermark. If you violate, we will investigate the relevant legal responsibility.
Since its establishment, the company has been engaged in the R & D and production of automatic locking screw equipment, and has no other business. Please refer to our official website http://356cash.com/


Online Service ×