There is no requirement on the product size of the speed-speed automatic locking screw machine. No matter how big the product can be, the automation solution can be designed according to the actual size, but the screws must be between M1-M8.
Customization is the basis for the development of the automatic locking screw machine industry. Only by designing solutions according to customer requirements can the application field of automatic locking screw equipment be continuously improved. We have designed many cases where the length and width of the product exceeds 1 meter. No matter what the product is, as long as it is professionally systematically designed and simulated, we can always find a scientific and reasonable solution.
The figure below shows the multi-axis design of the LED lamp. The length of the lamp tube is 1500mm, and 6 screws on both sides need to be locked. The horizontal locking scheme is adopted , and the total length of the equipment is 3000mm.
This solution is designed strictly according to the product characteristics, and can screw 6 screws on both sides at one time.
The coordinate scheme can also design the device size according to the product characteristics. The following is a large TV lock payment scheme, which uses a coordinate adsorption solution.
Therefore, when consulting a solution, you don't need to consider the use of large products. You only need to provide the product size and screw specifications. Some design solutions need to be discussed by both parties.